What did you do today?

[hihobaron]

Hello Charlie Horse and All

This is Part Two of the Red Neck Goat Shed project.

As with any Projects you do you run into problems.
Nothing Major just some dimension problems from the first part of the tarp that was cut off.
Not quite wide enough for the height of the arch or long enough to cover the length of the shed.
I went ahead and just to see were and how would be the best system to fit the final cover.
For the Length problem all I have to do cut the next piece longer.
For the side wall  shortage I will just make a under lap with the wall sheet then over lap the roof sheet on it.
Tied down it will shed rain, an in hot weather can be held open for ventilation.
The wall sections will be made from the cover now on for the wall sections.
Here are the Latest Pictures:

You can see the arch made with Cattle panel in place and fastened down.
 

Just a little bit short

This shows the steel tube in the pocket and then tiring down the sides of the Roof Tarp.
The wall Tarp will Under Lap the roof tarp to shed rain and keep it from blowing into the sheltered area.
So much for the progress on the Red Neck Goat Shed.
Happy Trails
hihobaron